First, turn off the electricity to the machine by removing the live battery wire from its station. After disconnecting the battery, you’ll need to take off the trim boards enveloping your car stereo. Each car just a tiny bit unique here.

Next, you need to dispatch the previous head unit directly out until the wires connected to the back are accessible. Unplug the cord, discharge the cabling harness and proceed to remove the antenna cable by unscrewing it. The cabling harness is the structural fastener that integrates all of the cabling for the sound system into an individual connection. The new head unit you have purchased should have included an adapter that matched the factory installed cabling. The end of the cabling on the end, should have four to eight colored wires coming from the back. There should be two such wires that plug to each speaker; one positive one negative. Most negatives are shown with a black stripe while positives are generally either solids or have a white stripe.

If your new car DVD player does not come with an adapter that works with the harness in the dash, you need to purchase a cabling harness kit. The new harness will have to be plugged into the new stereo. Match the colored wire to its match and put them together. After having the wires connected to their proper match, the stereo should be ready to install. Hold the system to the dash to plug the proper connections into the back. You can pause and test what you have done to make sure you have correctly pared the wires.

Once you find that everything is in order; proceed to carefully push the unit all the way into the dash and replace the screws. After the stereo is mounted correctly, put the trim boards back up and reattach everything holding them in place.

Finally, you got a new Android stereo for your car.

Now, in-dash dvd player navigation system basically became a car driving auxiliary tool. You are not familiar with roads and how to arrived its destination if you drove up to the strange city. This time you should need a car gps navigation to accompany you. Used car navigation can greatly improve the efficiency, and even help us to ensure the safety of driving.

Car gps navigation systems currently has many kinds, The use of hardware is mainly divided into independent automotive navigation systems and mobile phone navigation systems.

This paper mainly discusses is independent automotive navigation. The independent car navigator have roughly from built in operating system in use is: Win CE system and Android syatem.

For in car navigation systems on the aftermarket of the most popular is the Win CE system. The use of Windows CE, not only can stably navigation, also support the market for most major navigation software, mature and stable. However , the windows CE software expansibility is not good. In addition to professional navigation software, other entertainment is not abundant. (though many independent GPS has built in rich software, such as game, music player and electronic reader).

If you want to buy a stable and mature navigator, then select the windows CE system is a quite good choice.

For android navigation system, Except the navigation outside, also can be installed at present many android application software. Installed software to play games, listen to music and even the internet.

Using android system, GPS system has been the equivalent of a tablet computer. If you value GPS navigation scalability(for example, want to install the game and other software), then choose android system using the navigator is the good choice.

No matter which type of navigation you want, to test the actual positioning accuracy. General good navigation performance in half minite and positioning accuracy.