满400减10%

Discount Start Date: Sep 8, 2017
Discount End Date: Sep 30, 2017



5% off

Discount Start Date: Sep 8, 2017
Discount End Date: Sep 30, 2017



How to Set Up a Car DVD Player for Your Car

If you have kids, take your car on long trips or enjoy camping, you may wish to install a DVD player in your car for entertainment on the road. You can purchase car multimedia player and LCD screen, or just a plain DVD player to use with existing LCD screens in your car.

Steps:

1

1: Open the hood of the car and disconnect the battery. You can disconnect the negative cable only and still be safe, but it’s best to disconnect both the positive and the negative cable.
2
2: Using the proper screwdriver, take out the screws holding the factory stereo in your car’s dashboard, then remove the stereo from the dash. You may have to remove parts of the dash to take the stereo out.
3
3: Carefully remove the connectors from the back of the stereo. Check the connectors to make sure they’re not broken or dirty.
4
4: You can buy a wiring harness designed for your vehicle at a car audio and video equipment dealer; these are intended for aftermarket installations. Connect the wiring harness to the car’s connector. See the wiring harness instructions for the proper connection.
5
5: Insert the car DVD player in the aftermarket installation kit head unit. All dashboards are different, so you must buy an installation kit that matches the make of car.
6
6:Connect the other end of the wiring harness to the back of the car DVD player.Connect the antenna cable to the antenna input on the back of the car DVD player.
7
7:Insert the car DVD player and the installation kit in the car’s dash. Put in any screws that are required and replace any dash panels that you removed.
8
8: Replace the battery cables and make sure they are tightened. Close the hood and turn on the car. The car DVD player panel will light up if the installation was successful.
2017-05-05