Imagine my surprise when I went looking for a DVD for my car. We were to take our grandkids for an extended road trip and I thought it would help it to a DVD player. The trouble is “monitor”. I saw all these good priced monitors and thought that is real great to get the monitor and the DVD for that price. Then I discovered that they really did mean just the monitor. Not the DVD in a monitor, but a monitor.
If you want a monitor with DVD you need to look for a monitor that includes the DVD. Otherwise all you get is a “monitor”. So here is some quick information on monitors and what to look for.
The flip down car video monitor is probably the one you are most familiar with. It is mounted to the roof of the car and flipped down when in use. Then is is flipped up out of the way. It is used by the back seat passengers and the monitor usually ranges from 7-12 inches.
The Overhead Car Video Monitors can be attached to the ceiling of the car. Most usually you find them in mini vans, and SUVs because they require some of the head room. It usually fits over the inside light. These can be 7-20 inches in width.
Headrest car video monitors are built into the back of the headrest. You can buy the whole headrest since most of you will not want to cut out a chunk of your present headrest. Keep the old headrests so you can put them back in the car when you trade it in, thus allowing you to keep the head rest for the new car.
Headrest Portable car video monitors are essentially portable DVDs. They can be attached to the back of the headrest and be moved about. These range in size from 5-10 inches. This was my choice because it can be taken out of the vehicle and used in to motel room, the camper, the trailer, a tent…well, you get the idea.
In-dash car video monitors are put in the dash for the entertainment of the front seat passenger. Driver you need to keep your eye on the road. It can be flipped up and down for convenience and space. They are usually less than 7 inches.
The Sun visor car video monitor can be mounted into your visor or you can replace your original sun visor with it. It is usually 5-7 inches in length.
Mirror car video monitors are made to fit over the rear-view mirror. They are great to be used as a rear view camera. It is very small, usually no more than 4 inches.
Now the most important thing to remember is that you need the DVD with these monitors if you wish to play a DVD. So remember that if you do not want to buy a separate DVD you need to look for a monitor that includes a built in the car DVD player. They are out there and can be found easily. Just don’t be fooled into buying a monitor thinking it has a DVD included.
View more products at our global online store: http://www.autopumpkin.com/
UK store: http://www.autopumpkin.co.uk
DE store: http://www.autopumpkin.de/
Related Posts
Basic Knowledge of Car DVD PlayerFeatures: As a replacement for CD player, car DVD playerhas been upgraded with more functions, such as GPS navigation and iPod/iPhone input etc. What’s more, it’s equipped with display screen and Win CE/ Android intelligent OS, which left a large space to expand and add more functions. Specification: The car audio playerwhich equipped with display screen is bigger than the traditional CD player. Currently, the double DIN car DVD player is quite common. Function:With the rapid development of electronic application technology in recent years, the car stereohas become a “integrated platform”. It not only supports Bluetooth, Wi-fi, but supports DVR and hands-free etc. Input:Generally speaking, CD/DVD, FM and DAB is the way to input audio and video. But nowadays, car audio player can read and play various audio, video and document files through USB/AUX/SD card and Bluetooth. Output:Choices for output include audio signal and RCA. To transfer the signal to DSP processor, few stereos would also support optical and coaxial output. Touch screen: More and more in-dash car DVD players are equipped with the HD touch screen. Therefore, the sensitivity and response speed of touch screen are important standards to measure the units’ Sound quality:Most Android car head unitis equipped with single DVD pick up head, which don’t perform as well as special CD pick up head. Thus, we’ll recommend users to buy DSP audio processor additionally.
FAQ for Android Car Stereo Amplifier1.How can I populate my address book’s contacts into the Android car stereo universal? A: For downloading the address book’s contacts from your phone to the radio: firstly, you need to pair your phone with the Android head unit, then please click the contacts icon and search your contacts like the following picture: Please make sure that you use the built-in contacts in your phone, otherwise it can not be searched. Also, if your smartphone runs Android 5.0 OS or above, please allow all the submissions in your phone when the stereo searches the contacts. 2.After installing the car DVD player, I can’t hear any sound through the speakers or the Bluetooth. The music is attenuated but no phone or GPS instructions can be heard. Is there a hidden menu to give more volume to GPS and Bluetooth? A: Normally, we don’t have hidden menu to give more volume. And for setting the GPS app sound ( we pre-installed the IGO free copy version ), please check the setting below: You can re-install the IGO app from our SD card to check whether it would help or not. Besides, please enter the settings=>GPS, make sure that you turn on the GPS monitoring. You can turn up the GPS mixing ratio so that the GPS sound would be louder. As for the Bluetooth issue, if you make the phone call via Bluetooth, please well close your car windows and doors, then turn the volume of both your phone and the head unit to the middle level. You can also enter the factory setting ( the password is 126 ), and check the BT setting. 3.In case of the extra mic, how can I increase the volume ? I don’t find any possibility to adjust the mic volume in the car audio player. A: Please use the extra mic and increase the car radio’s volume. 4.I’m not able to get torque to recognize that Bluetooth is on. Therefore, I can’t connect Bluetooth to the OBD. I can connect to it from my phone but not from the Pumpkin Car Head Unit. Is there something I can do to get this to work ? A: For pairing the OBDII, you need to know the protocol of your car and select the correct protocol in “Torque”. Followings are the whole instruction: ①Please enter “Bluetooth ”application, then set the pairing code of the radio to the same one as the OBDII scanner’Generally, it would be 0000 or 1234. ( please try both ) ②Then please open the built-in torque, choose the OBDII scanner MAC address in the application setting and choose your car protocol. 5.How do I change the default music app ? A: Since the car DVD player Bluetooth is based on Android 4.4, you can download other music player apps like Spotify in the built-in play store ( need Wifi or other Internet source ) and install it on the head unit.…
Car Stereo Installation GuideBy Robert Ferency-Viars This installation guide walks you through the process of installing a new Android car stereo. Please read over these guidelines before beginning the installation in order to give yourself an idea of what to expect. Tools Needed (depending upon vehicle) Remove the factory stereo When installing a new stereo in your car, your first step will be to remove the old stereo. Pay close attention to the steps involved, for the process for installing your new stereo will be the same, but in reverse. For detailed information on how to remove the factory stereo in a specific vehicle, refer to your Crutchfield MasterSheet™ instructions, if available. They will walk you through the process step-by-step. Otherwise, you may use the general guidelines below. Before you begin, start by setting the parking brake and removing the negative cable from the car battery to prevent accidentally short circuiting something. Disconnect your battery's negative terminal before any installation job to protect your electrical system.. Your factory stereo will be mounted in one of two ways: secured in a metal mounting sleeve by spring clips bolted to the dash with brackets…